3PC Welded Ball Valve 1000WOG

Screwed 、Clamp 、Welded vavle The three piece welded ball valve is divided into butt weld (BW) and socket weld (SW) types. The valve body is cast using advanced process, reasonable in structure and elegant in appearance; the valve seat is of elastic seal structure, reliably sealed and easily opened and closed; the valve rod is of bottom mounting structure with back seal, and will not fly out in case of abnormal pressure rise inside the valve cavity. The valve can be equipped with ISO standard support platform, locking device, and 90° switch locating mechanism. The valve can thus be locked as required to prevent accidental operations. There are three drive modes, manual, electric and pneumatic modes.

Keyword: 3PC Welded Ball Valve 1000WOG

Detail

The three piece welded ball valve is divided into butt weld (BW) and socket weld (SW) types. The valve body is cast using advanced process, reasonable in structure and elegant in appearance; the valve seat is of elastic seal structure, reliably sealed and easily opened and closed; the valve rod is of bottom mounting structure with back seal, and will not fly out in case of abnormal pressure rise inside the valve cavity. The valve can be equipped with ISO standard support platform, locking device, and 90° switch locating mechanism. The valve can thus be locked as required to prevent accidental operations. There are three drive modes, manual, electric and pneumatic modes.

Design standards

Design Standard:ASME B16.34

Face to Face:DIN3202-M3

End Connections:ASME B16.25 & DIN3239part1

ASME B16.11 & DIN3239part2

Test and Inspection:API 598

Nominal diameter:1/8"(8mm)-4"(100mm)

Recommended Commodities

Message