Resilient Seat Gate Valve
Resilient Seated Gate Valves are suitable for use in drinking water and waste water, which can be installed under or above ground. Rising stem gate valves are normally used in fire service application and socket end resilient gate valves are normally used in PVC pipelines. The Resilient seated gate valves are designed to isolate the system’s fluid. The valve wedge is fully rubberized with vulcanized rubber, those frequently occurred problems like leakage, rust etc can be avoided by using these resilient seated gate valves.
Keyword： Resilient Seat Gate Valve
Classify：
Detail
Resilient Seated Gate Valves are suitable for use in drinking water and waste water, which can be installed under or above ground. Rising stem gate valves are normally used in fire service application and socket end resilient gate valves are normally used in PVC pipelines.
The Resilient seated gate valves are designed to isolate the system’s fluid. The valve wedge is fully rubberized with vulcanized rubber, those frequently occurred problems like leakage, rust etc can be avoided by using these resilient seated gate valves.
Resilient Seated Gate Valves are with Main Features as below:
» Ductile Iron Body & Bonnet with high strength and impact resistance.
» Rubber Encapsulated DI wedge to ensure drop tight sealing.
» Rubber bonnet gasket for longevity and protection of bonnet bolts.
» Stainless Steel Stem with high strength and corrosion resistance.
» Back sealing facility to allow for replacement of seals under full operating pressure.
» Straight through full bore to avoid debris traps.
» Isolated fasteners for corrosion protection.
» Wiper ring to prevent impurities from entering the stem sealing system.
Anti friction thrust washer for low operating torques.Integral cast in foot for safe and easy storage.
Nominal diameter:1/2"(15mm)-80"(2000mm)
» Full diameter waterway Hand wheel, square cap, operation.
» Design and manufactured strictly in compliance to SANS AWWA, DIN, ANSI, ASTM, BS & JIS Standards
» Service conditions:
- Temperature from-10C to 120C for EPDM seat.
- Temperature from-12C to 82C for NBR seat.
Resilient Gate Valves including, but not limited to
▲Rising Stem Resilient Gate Valve
▲Non-rising Stem Resilient Gate Valve
Recommended Commodities
Message
We’d love to hear your comments Please feel free to contact us
CONTACT US
Add: No.2469，Binhai 6Rd,Binhai Industrial Park ,Wenzhou China 325024
TEL: +86-577-5661-4886
FAX: +86-577-8977-3128
Cell: +86-15088985999
Whatsapp: +86-13587676911
Skype: samliu123321
Email : sam@samflow.com
Email : sam@samflow.com
SAMSON Flow Equipment(WENZHOU) CO.,LTD. Powered by www.300.cn SEO