Coal Chemical-Products-Valve-Flow Equipment-SAMSON Flow Equipment(WENZHOU) CO.,LTD

Cast Steel Trunnion mounted ball valves allow easy and smooth operation at high line pressure. Carefully aligned bearings assist low torque operation. The ball is fixed in position but free to turn. All Casted Trunnion Ball Valves are with reliable high quality castings and fire safe design certified according to BS 6755, API607 & API 6FA. Meet all applicable ASME standards. Cast Steel Trunnion Ball Valves are available in types of Two Piece Split Body & Three Piece Bolted Body. Designed and manufactured to the most updated international standards API 6D, ASME B16.34, BS 5351 or equivalents. With standard features of Fire Safe, Anti-static and Stem Blow-out Proof

Trunnion Mounted Ball Valve

Trunnion Mounted ball valve is a new generation of high-performance ball valve, suitable for long-distance pipelines and general industrial pipelines. Its strength, safety, and resistance to harsh environments have been specially considered in design, and it is suitable for various corrosive and non corrosive media. Compared with floating ball valves, during operation, all the force generated by the fluid pressure in front of the valve on the ball is transmitted to the bearing, which does not cause the ball to move towards the valve seat. Therefore, the valve seat will not bear excessive pressure. Therefore, the torque of the fixed ball valve is small, the deformation of the valve seat is small, the sealing performance is stable, and the service life is long. It is suitable for high-pressure and large-diameter situations. Advanced spring pre seat components with self tightening characteristics achieve upstream sealing. Each valve has two seats that can be sealed in each direction, so there is no flow restriction during installation and it is bidirectional. This valve is generally installed horizontally.

Forged Trunnion Ball Valve

With all advantages of Trunnion Mounted Ball Valves, Forged Steel Line are available in types of Two Piece Split Body & Three Piece Bolted Body. The forging material can ensure sufficient rigidity and strength under maximum rated operation pressure. Without inherent flaw of cast. Enough wall thickness of separate body and adaptation of high strength tie bolts are convenient for valve maintenance and sufficient to bear the stress of pipe.The internal parts of valve are carefully designed and selected to ensure reliability under all kinds of work conditions. All Trunnion Mounted Forged Ball Valves are designed and manufactured to the most updated international standards API 6D, ASME B16.34, BS 5351 or equivalents. With standard features of Fire Safe, Anti-static and Stem Blow-out Proof

Ball Valve （Trunnion Mounted）

Trunnion Mounted ball valve is a new generation of high-performance ball valve, suitable for long-distance pipelines and general industrial pipelines. Its strength, safety, and resistance to harsh environments have been specially considered in design, and it is suitable for various corrosive and non corrosive media. Compared with floating ball valves, during operation, all the force generated by the fluid pressure in front of the valve on the ball is transmitted to the bearing, which does not cause the ball to move towards the valve seat. Therefore, the valve seat will not bear excessive pressure. Therefore, the torque of the fixed ball valve is small, the deformation of the valve seat is small, the sealing performance is stable, and the service life is long. It is suitable for high-pressure and large-diameter situations. Advanced spring pre seat components with self tightening characteristics achieve upstream sealing. Each valve has two seats that can be sealed in each direction, so there is no flow restriction during installation and it is bidirectional. This valve is generally installed horizontally.

DIN3352-F4 Non-Rising Stem Resilient Soft Seat Gate Valve New Type

DESCRIPTION 1. Working pressure: 1.0Mpa/1.6Mpa 2. Working temperature: 0℃～+80℃ 3. Face to face according to DIN3202-F4/F5, GB-T1221 4. Flange according to DIN2533, EN1092, BS4504, GB/T 17241.6 5. Design standard: DIN3352, BS5163, G/B 6. Medium: Water, Steam, Oil, Gas etc.

Electrical Actuatored Gate Valve

What is an electric valve? Simply put, an electric valve uses an electric actuator to control the valve, thereby achieving the opening and closing of the valve. It can be divided into two parts: the upper part is an electric actuator, and the lower part is a valve.

SANS 664 Gate Valve

Cast Iron Gate Valves are available both in Resilient seated and I Metal Seated Gate Valves. Designed and manufactured to the most updated international standards ASME B16.34, BS 5156, DIN 3352, AWWA C509 or equivalents. With standard features of Rising or Non Rising Stem, Bolted Bonnet and Stem Nut operation.

Cast Steel Gate Valve

Cast Steel Gate Valves are designed and manufactured to ensure leakage of less than 100 ppm (parts per million) of volatile organic compounds. Extensive base line laboratory testing (static and cycle testing) has been performed establishing critical design parameters necessary to achieve

Flanged Gate Valve

Cast Steel Gate Valves are designed and manufactured to ensure leakage of less than 100 ppm (parts per million) of volatile organic compounds. Extensive base line laboratory testing (static and cycle testing) has been performed establishing critical design parameters necessary to achieve low emission sealing in the stem packing seal area and in the bonnet gasket sealing area, In-house testing procedure has been developed and is periodically performed to ensure that standard product design and manufacturing criteria consistently result in the Cast Steel Gate Valve meeting a maximum of 100 ppm VOC leakage prior to shipment.

SANS 665 Gate Valve Rising Spindle

Gate Valves are available both in Resilient seated and I Metal Seated Gate Valves. Designed and manufactured to the most updated international standards ASME B16.34, BS 5156, DIN 3352, AWWA C509 or equivalents. With standard features of Rising or Non Rising Stem, Bolted Bonnet and Stem Nut operation.

Resilient Seat Gate Valve

Resilient Seated Gate Valves are suitable for use in drinking water and waste water, which can be installed under or above ground. Rising stem gate valves are normally used in fire service application and socket end resilient gate valves are normally used in PVC pipelines. The Resilient seated gate valves are designed to isolate the system’s fluid. The valve wedge is fully rubberized with vulcanized rubber, those frequently occurred problems like leakage, rust etc can be avoided by using these resilient seated gate valves.

BS5163 Non-Ring Stem Gate Valve With Changeable O-Ring

Cast Iron Gate Valves are available both in Resilient seated and I Metal Seated Gate Valves. Designed and manufactured to the most updated international standards ASME B16.34, BS 5156, DIN 3352, AWWA C509 or equivalents. With standard features of Rising or Non Rising Stem, Bolted Bonnet Cast Iron Gate Valves are available both in Resilient seated and I Metal Seated Gate Valves. Designed and manufactured to the most updated international standards ASME B16.34, BS 5156, DIN 3352, AWWA C509 or equivalents. With standard features of Rising or Non Rising Stem, Bolted Bonnet and Stem Nut operation.

SAMSON Flow Equipment(WENZHOU) CO.,LTD.

PRODUCTS