Gas & Liquid Transmission Lines-Products-Valve-Flow Equipment-SAMSON Flow Equipment(WENZHOU) CO.,LTD

Globe valve(flanged, welded) Design standards Design ＆Manufacture as per:GB/T 12234、BS 1873 Face to face dimension as per:GB/T 12221、ASME B16.10 Connection ends dimension as per:JB/T 79、HG/T 20592、ASME B16.5 Inspection and test as per:GB/T 79、API 598 Performance Specification Nominal pressure: 1.6,2.5,4.0,6.3Mpa Strength test: 2.4,3.8,6.0,9.5Mpa Seal test:1.8,2.8,4.4,7.0Mpa Gas seal test: 0.6Mpa Valve body matenial:WCB(C),CF8(P),CF3(PL), CF8M(R),CF3M(RL) Suitable medium: water, steam, oil products, nitric acid, acetic acid Suitable temperature: -29℃~425℃

Wafer Type Lift Check Valve

DESCRIPTION 1. Working pressure: 4.0Mpa 2. Working temperature: -50℃～+400℃ 3. Face to face according to ANSI B16.5 4. Flange according to EN1092-2, PN16/25/40. ANSI 150LB etc. 5. Testing: API598 6.Medium: Fresh Water, Sea water, food stuff, all kinds of oil, acid, alkaline liquid etc

Threaded Ball Check Valve with Cast Iron

DESCRIPTION 1. Full bore flow, large flow, small resistance 2. Low head loss 3. Installation: horizontal or vertical, BSP or BSPT 4. Working pressure: 1.6Mpa 5. Pressure test according to standards: API598 DIN3230 EN12266-1 6. Working temperature: NBR: 0℃～+80℃ EPDM: -10℃～+120℃ 7.Medium: Waste water, Stickly fluids and raising water etc.

Flanged Ball Check Valve

DESCRIPTION: 1. Flange accord with: EN1092-2 PN10/16 2. Face to face accord with: DIN3202 F6 3. Full bore flow, large flow, small resistance 4. Low head loss 5. Installation: horizontal or vertical 6. Working pressure: 1.0MPa/1.6Mpa 7. Pressure test according to standards: API598 DIN3230 EN12266-1 8. Working temperature: NBR: 0℃～+80℃ EPDM: -10℃～+120℃ 9. Minimum Opening pressure: 0.002MPa

Flange Silent Check Valve

DESCRIPTION 1.Flange according to EN1092-2 PN10/16 2.Excellent tightness 3.Low head loss 4.Extremely reliable 5.Excellent hydraulic result 6.Simplicity in mounting and use 7.Working pressure: 1.0Mpa/1.6Mpa 8.Pressure test according to standards: API598 DIN3230 EN12266-1 9.working temperature: NBR: 0℃～+80℃ EPDM: -10℃～+120℃

Thin Single Disc Swing Check Valve

DESCRIPTION: 1.Flange according to EN1092-2 PN10/16 2.Face to face according to DIN3202 K3-1999, ANSI125/150 3.Working position in horizontal and vertical ascending fluid 4.Low weight 5.Easy mounting, short length 6.Seat inside body, low head loss7.Seat: rubber/metal or metal/metal 8.Option: O ring for face flanges 9.Working pressure: 1.0Mpa/1.6Mpa 10.Pressure test according to standards: API598 DIN3230 EN12266-1 11.working temperature: NBR: 0℃～+80℃ EPDM: -10℃～+120℃ VITON: -23℃～+150℃ 12.Medium: Water, air conditioning and hydrocarbon and irrigation etc.

Silent Check Valve

DESCRIPTION 1.Flange according to ANSI 125/150 2.Face to face according to ANSI 125/150 3.Excellent tightness 4.Low head loss 5.Extremely reliable 6.Excellent hydraulic result 7.Simplicity in mounting and use 8.Working pressure: 1.0Mpa/1.6Mpa 9.Pressure test according to standards: API598 DIN3230 EN12266-1 10.working temperature: NBR: 0℃～+80℃ EPDM: -10℃～+120℃ 11.Medium: Fresh Water, Sea water, all kinds of oil, acid, alkaline liquid etc.、

Double Disc Swing Check Valve

DESCRIPTION 1.Working pressure: 1.0Mpa/1.6Mpa/2.5Mpa 2. Working temperature: NBR: 0℃～+80℃ EPDM: -10℃～+120℃ VITON: -20℃～+180℃ 3. Face to face according to DIN3202K3, ANSI 125/150 4. Flange according to EN1092-2, ANSI 125/150 etc. 5. Testing: DIN3230, API598. 6.Medium: Fresh Water, Sea water, food stuff, all kinds of oil, acid, alkaline liquid etc.

Single Disc Swing Check Valve

DESCRIPTION 1. Flange according to EN1092-2 PN10/16 2. Face to face according to ANSI 125/150 3. Mounting between flanges 4. Working position: horizontal and vertical 5. Low head loss 6. Stainless steel spring technology to avoid fluid hammer 7. Working pressure: 1.0Mpa/1.6Mpa 8. Pressure test according to standards: API598 DIN3230 EN12266-1 9. Working temperature: NBR: 0℃～+80℃ EPDM: -10℃～+120℃ 10.Medium: Fresh Water, Sea water, food stuff, all kinds of oil, acid, alkaline liquid etc.

Stainless Steel Single Disc Swing Check Valve

DESCRIPTION 1.Flange according to EN1092-2 PN10/16 2.Face to face according to ANSI 125/150 3.Mounting between flanges 4.Working position: horizontal and vertical 5.Low head loss 6.Stainless steel spring technology to avoid fluid hammer 7.Seat: rubber/metal or metal/metal 8.Working pressure: 1.6Mpa 9.Pressure test according to standards: API598 DIN3230 EN12266-1 10.working temperature: NBR: 0℃～+80℃ EPDM: -10℃～+120℃ VITON: -23℃～+150℃ 11.Medium: Fresh Water, Sea water, food stuff, all kinds of oil, acid, alkaline liquid etc.

Thin Single Disc Swing Check Valve with Spring

DESCRIPTION: 1.Flange according to EN1092-2 PN10/16 2.Face to face according to DIN3202 K3-1999, ANSI125/150 3.Working position in horizontal and vertical ascending fluid 4.Low weight 5.Easy mounting, short length 6.Seat inside body, low head loss7.Seat: rubber/metal or metal/metal 8.Option: O ring for face flanges 9.Working pressure: 1.0Mpa/1.6Mpa 10.Pressure test according to standards: API598 DIN3230 EN12266-1 11.working temperature: NBR: 0℃～+80℃ EPDM: -10℃～+120℃ VITON: -23℃～+150℃ 12.Medium: Water, air conditioning and hydrocarbon and irrigation etc.

Emergency Shear(Shut-Off) Valve (single Poppet)

The Cast Iron Check Valves are designed and manufactured to ensure low leakage to international standards, Extensive base line laboratory testing (static and cycle testing) has been performed establishing critical design parameters necessary to achieve low emission sealing in the Iron Check Valves, In-house testing procedure has been developed and is periodically performed to ensure that standard product design and manufacturing criteria consistently result in the cast iron check Valve meeting a maximum of leakage prior to shipment.

SAMSON Flow Equipment(WENZHOU) CO.,LTD.

PRODUCTS