SAMSON Flow Equipment(WENZHOU) CO.,LTD.

PRODUCTS

Gas & Liquid Transmission Lines

Valve:
Ball Valve
Gate Valve
Globe Valve
Check valve (Non-Return valve)
Butterfly Valve
Diaphragm Valve
Plug Valve
Solenoid Valve
Safety Vave
Other
Knife Gate Valve
Power Station Valve
Steam Trap
Service:
Subsea Systems(Marine)
LNG
Gas & Liquid Transmission Lines
Refining&Petrochemical
Coal Chemical
Mining&Minerals
Water Treatment
Power Station
Fire Safe
Condition:

Steam Trap


The function of steam trap (referred to as steam trap) is to automatically eliminate non condensable gases such as steam condensate and air in heating equipment or steam pipelines, and not leak steam. Due to the function of steam trap to block steam and drain water, it can evenly heat the steam heating equipment and fully utilize the latent heat of steam to prevent water hammer in the steam pipeline.

Top Entry Trunnion Mounted Ball Valve


The top mounted ball valve is easy to disassemble and quickly maintain on the pipeline. When the valve malfunctions in the pipeline and needs to be repaired, there is no need to disassemble the valve from the pipeline. Simply remove the middle flange bolts and nuts, remove the valve cover and valve stem assembly together from the valve body, and then remove the ball and valve seat assembly. The ball and valve seat can be repaired online. This type of maintenance saves time and minimizes losses in production.

Safety Valve


A safety valve is a special valve in which the opening and closing parts are in a normally closed state under external force. When the pressure of the medium in the equipment or pipeline increases beyond the specified value, the medium is discharged outside the system to prevent the pressure of the medium in the pipeline or equipment from exceeding the specified value. Safety valves belong to the category of automatic valves, mainly used in boilers, pressure vessels, and pipelines. They control the pressure to not exceed the specified value and play an important protective role in personal safety and equipment operation. The safety valve must undergo a pressure test before use.
< 1...5678 >