Fire Safe-Products-Valve-Flow Equipment-SAMSON Flow Equipment(WENZHOU) CO.,LTD

Five eccentric structure; double stem design, small flow resistance, low energy consumption Five eccentric anti crystallization structure; the upper and lower bearing dust-proof structure can be added with spiral groove anti crystallization structure. After the medium is drained, the lower valve rod needs to be fixed shaft structure, and the medium in the clearance between the lower valve rod and the butterfly plate is used because of the spiral groove gravity, and the medium is automatically drained without crystallization, resulting in the valve rod locking. Five eccentric structure; the upper stem spline has no pin to prevent blow out structure, and the double stem structure solves the inconsistency between the stem and the butterfly plate and the valve body caused by the hot bulge Five eccentric structure; the lower valve rod adopts the fixed shaft with better rigidity, which can shorten the connection position of the valve rod inserted into the butterfly plate and make the channel flow resistance smaller Five eccentric butterfly valve; the connecting structure of the valve rod and the butterfly plate spline, evenly stressed, no risk of shearing pin and key, convenient for disassembly and assembly Five eccentric butterfly valve; connecting structure of valve rod and drive spline, uniform stress, no risk of shearing pin and key, convenient disassembly Five eccentric butterfly valve; constant pressure packing mechanism with butterfly spring, which can automatically compensate packing loss and prevent medium leakage Five eccentric structure; the whole machine can be completely disassembled and reassembled on site, that is, each accessory Detachable and integrally forged valve seat, replaceable integral butterfly plate seal ring design, will not cause the whole machine to report fees and reduce the use cost due to seal wear problems

Centerlined Butterfly Valve

The Wafer Concentric Butterfly Valves is designed to maintain a seal against bi-directional pressure differential to prevent backflow in systems designed for unidirectional flow. It accomplishes this with a tightly fitting seal, i.e., gasket, o-ring, precision machined, and a flat valve face on the upstream and downstream sides of the valve, valves have threaded inserts at both sides of the valve body. This allows them to be installed into a system using two sets of bolts and no nuts. The valve is installed between two flanges using a separate set of bolts for each flange. This setup permits either side of the piping system to be disconnected without disturbing the other side.

PTFE Lined Butterfly Valve

The fully Fluorine lined butterfly valve is designed for aggressive chemical and ultra-pure applications. Fluorine lined resists chemical attack from most known chemical compounds, and with a flexible liner design utilizing a full width, 360 degree, resilient back up liner offers bubble tight shut off in even the most demanding installations. Redundant shaft seals provide a tight, reliable seal to the environment. This is a “maintenance free” valve design which uses long life sleeve bearings and avoids the use of an adjustable packing gland. The valve shall be a 90 turn clockwise to close, non-jamming, resilient seated valve for zero leakage service. The valve shall be torque seated and designed in such a manner that the disc can be rotated the seat with out the actuator. Also this valve enables the fluid perfect shut-off regardless of the flow direction.

KB Type Diaphragm Valve

DESCRIPTION 1.Working pressure: DN50-DN125: 1.0Mpa DN150-DN200: 0.6Mpa DN250-DN300: 0.4Mpa 2. working temperature: NR: -20℃～+60℃ 3.Face to face:EN588-1 4.Flangs standard: EN1092 BS4504 etc. 5.Testing:DIN3202 API598 6.Medium: Cement, Clay, Cinder, Granular fertilizer and so on solid fluid, Fresh Water, Sea water, inorganic acid and alkaline liquid etc.

API Soft Sealing Lubricate Plug Valve

The Resilient Seat Lubricated Plug Valves is of the "block" or complete shut-off type. It may be used for throttling where accurate adjustment is not necessary. But the primary service is positive open-close operation. Three basic parts comprise the lubricated plug valve: body, cover and plug. The plug is the only movable member. The valve is opened by rotation only, the plug turning on a lubricated seat. While the plug is available in cylindrical and tapered form, the later is generally preferred, because the tapered rotary principle results in quick and simple valve operation. The conical shape of the plug combines the tight fit advantage of wedge action with the sliding action of rotary movement. Rotation eliminates the need for raising and lowering a movable valve member, and protects seating surfaces from exposure to corrosive elements.

Sleeve Soft Sealing Plug Valve

According to the form of the structure can be divided into compact plug valve, self-sealing plug valve, plug valve and oil type plug valve four. According to the channel form, can be divided into straight through plug valve, three-way plug valve and four-way plug valve. And a clamped plug valve. Classification of plug valves by purpose includes: soft seal plug valves, oil lubricated hard seal plug valves, lifting plug valves, three-way and four-way plug valves.

Jacket Plug Valve

Stainless Steel Jacket Plug Valves are designed and manufactured strictly to International Standards API 599, ASME B16.34 or DIN3202 with the Jackted to maintain the Medium Temperture, Featured with compact structure & Low emission service.

Inverted Pressure Balance Lubricated Plug Valve

According to the form of the structure can be divided into compact plug valve, self-sealing plug valve, plug valve and oil type plug valve four. According to the channel form, can be divided into straight through plug valve, three-way plug valve and four-way plug valve. And a clamped plug valve. Classification of plug valves by purpose includes: soft seal plug valves, oil lubricated hard seal plug valves, lifting plug valves, three-way and four-way plug valves.

Pressure Balanced Lubricated Taper Plug Valve

Technical specifications Design & manufacturing: API599, API6D; Structural length standard: ASME B16.10; Flange standard: ASME B16.5; Pressure-temperature rating: ASME B16.34; Inspection & Test standard: API 598 Nominal pressure: class150~900lbs; class 125 for cast iron material; Work temperature: -29~180 degrees, and it can work at -196℃-650℃ by using special materials; Medium: oil, chemical, pharmaceutical, fertilizer, power industry etc., it is used for cut off or switch on the pipeline medium. Features 1. Reasonable structure, reliable sealing, good performance and beautiful appearance; 2. It is light to switch on/off; 3. An oil tank is arranged between the valve body and the sealing surface, and the sealing grease can be injected into the valve seat at any time to increase sealing performance; 4. Parts material and flange size can be selected according to actual working conditions or user requirements, to meet the needs of various projects.

Foot Valve

DESCRIPTION 1.Flange according to EN1092-2 PN10/16 2.Excellent tightness 3.Low head loss 4.Extremely reliable 5.Excellent hydraulic result 6.Simplicity in mounting and use 7.Working pressure: 1.0Mpa/1.6Mpa 8.Pressure test according to standards: API598 DIN3230 EN12266-1 9.working temperature: NBR: 0℃～+80℃ EPDM: -10℃～+120℃ 10.Medium: Fresh Water, Sea water, all kinds of oil, acid, alkaline liquid etc.

Top Entry Trunnion Mounted Ball Valve

The top mounted ball valve is easy to disassemble and quickly maintain on the pipeline. When the valve malfunctions in the pipeline and needs to be repaired, there is no need to disassemble the valve from the pipeline. Simply remove the middle flange bolts and nuts, remove the valve cover and valve stem assembly together from the valve body, and then remove the ball and valve seat assembly. The ball and valve seat can be repaired online. This type of maintenance saves time and minimizes losses in production.

SAMSON Flow Equipment(WENZHOU) CO.,LTD.

PRODUCTS