Gas & Liquid Transmission Lines-Products-Valve-Flow Equipment-SAMSON Flow Equipment(WENZHOU) CO.,LTD

What is an electric valve? Simply put, an electric valve uses an electric actuator to control the valve, thereby achieving the opening and closing of the valve. It can be divided into two parts: the upper part is an electric actuator, and the lower part is a valve.

SANS 664 Gate Valve

Cast Iron Gate Valves are available both in Resilient seated and I Metal Seated Gate Valves. Designed and manufactured to the most updated international standards ASME B16.34, BS 5156, DIN 3352, AWWA C509 or equivalents. With standard features of Rising or Non Rising Stem, Bolted Bonnet and Stem Nut operation.

Cast Steel Gate Valve

Cast Steel Gate Valves are designed and manufactured to ensure leakage of less than 100 ppm (parts per million) of volatile organic compounds. Extensive base line laboratory testing (static and cycle testing) has been performed establishing critical design parameters necessary to achieve

Flanged Gate Valve

Cast Steel Gate Valves are designed and manufactured to ensure leakage of less than 100 ppm (parts per million) of volatile organic compounds. Extensive base line laboratory testing (static and cycle testing) has been performed establishing critical design parameters necessary to achieve low emission sealing in the stem packing seal area and in the bonnet gasket sealing area, In-house testing procedure has been developed and is periodically performed to ensure that standard product design and manufacturing criteria consistently result in the Cast Steel Gate Valve meeting a maximum of 100 ppm VOC leakage prior to shipment.

SANS 665 Gate Valve Rising Spindle

Gate Valves are available both in Resilient seated and I Metal Seated Gate Valves. Designed and manufactured to the most updated international standards ASME B16.34, BS 5156, DIN 3352, AWWA C509 or equivalents. With standard features of Rising or Non Rising Stem, Bolted Bonnet and Stem Nut operation.

Resilient Seat Gate Valve

Resilient Seated Gate Valves are suitable for use in drinking water and waste water, which can be installed under or above ground. Rising stem gate valves are normally used in fire service application and socket end resilient gate valves are normally used in PVC pipelines. The Resilient seated gate valves are designed to isolate the system’s fluid. The valve wedge is fully rubberized with vulcanized rubber, those frequently occurred problems like leakage, rust etc can be avoided by using these resilient seated gate valves.

BS5163 Non-Ring Stem Gate Valve With Changeable O-Ring

Cast Iron Gate Valves are available both in Resilient seated and I Metal Seated Gate Valves. Designed and manufactured to the most updated international standards ASME B16.34, BS 5156, DIN 3352, AWWA C509 or equivalents. With standard features of Rising or Non Rising Stem, Bolted Bonnet Cast Iron Gate Valves are available both in Resilient seated and I Metal Seated Gate Valves. Designed and manufactured to the most updated international standards ASME B16.34, BS 5156, DIN 3352, AWWA C509 or equivalents. With standard features of Rising or Non Rising Stem, Bolted Bonnet and Stem Nut operation.

BS3464 Ring Stem Gate Valve

Cast Iron Gate Valves are available both in Resilient seated and I Metal Seated Gate Valves. Designed and manufactured to the most updated international standards ASME B16.34, BS 3464, DIN 3352, AWWA C509 or equivalents. With standard features of Rising or Non Rising Stem, Bolted Bonnet Cast Iron Gate Valves are available both in Metal seated and I Metal Seated Gate Valves. Designed and manufactured to the most updated international standards ASME B16.34, BS 3464, DIN 3352, AWWA C509 or equivalents. With standard features of Rising or Non Rising Stem, Bolted Bonnet and Stem Nut operation.

Slurry Knife Gate Valve

The series slurry knife gate valve is a bi-directional wafer knife gate valve equipped with two metal reinforced rubber sleeves, designed for applications with abrasive slurry.

Lugged Knife Edge Gate Valve

The Series Lugged Knife Edge Gate Valve is a unidirectional wafer knife edge gate valve used on industrial pipeline for on-off operation. The structure of body and seat eliminates clogging shutoff for flow with fine particles. Additionally, beveled knife edge helps the gate cut through thick media easily. According to different working situation: non-rising stem knife gate valve, wafer knife gate valve, lugged knife gate valve, pneumatic knife gate valve, electric knife gate valve, manual knife gate valve and bevel gear knife gate valve are all available.

Unidirectional Seal Knife Gate Valve/Heavy Seat Replaceable

Nominal diameter:DN50-DN100 DN125-DN200 DN250-DN300 DN350-DN400 DN450-DN550 DN600-DN650 DN700-DN750 DN800-DN900 DN1000 Type:Wafer,Lug Design Standard:MSS SP-81 Flange Standard:DIN PN10,PN16,150LB ,JIS 10K,TABLE E/D Face to Face:MSS SP-81 Testing Standard:API-598 Transmission:handwheel, electric, pneumatic, hydraulic, sprocket, electro-hydraulic, gear Main material:GGG40,CF8,CF8M,CF3,CF3M Disc material:F55,F53,2205,SS310,SS316L,SS316,SS304 Sealing material:NBR,NR,EPDM,FKM,Metal to Metal Packing:PTFE,high water based,rubber packing,graphite Applicable medium:Applicable for coal in power plant, slag discharge, sewage treatment, food, paper making, medicine and chemical industry, water, Oil, steam, gold powder, ores, slag, coal, pulp, wood pulp, tailings, fibers, dust, chemicals, sewage treatment, asphalt, fruit juices, cereals, slaughter plant waste and other media.

Unidirectional Seal Deslagging Knife Gate Valve

Nominal diameter: DN150-DN200 DN250-DN400 DN450-DN550 DN600-DN700 Design Standard:MSS SP-81 Flange Standard:PN10,PN16,150LB ,JIS 10K,TABLE E/D Face to Face:MSS SP-81 Testing Standard:AEN12266 Transmission:manual, electric, pneumatic, hydraulic, sprocket, electro-hydraulic, gear Main material:CF3M,CF8M,CF8,WCB,GGG40 Disc material:SS316L,SS304 Sealing material:EPDM,Metal to Metal Packing:PTFE,high water based,rubber packing,graphite Applicable medium:Applicable for Dust,Solid Particles,Coal,oil,chemical and so on.Slag, cinder,dislagging recommend

SAMSON Flow Equipment(WENZHOU) CO.,LTD.

PRODUCTS